1. Input Sheet & Roll Specs
Sheet Geometry
Width (inches)
Height (inches)
Thickness (mm)
Roll Axis Configuration
Roll Direction (wrapping axis):
Rolling along Width maps the width as the circumference of the cylinder. Rolling along Height maps the height as the circumference.
Cap Customization
Center Hole Size25.0 mm
Slip Ring Mount (13mm Center Hole)
Lip Groove Depth8.0 mm
Wall Thickness2.0 mm
Groove Tolerance0.20 mm
LED Strip Channels
Channel Count8
Channel Width10.0 mm
Channel Depth5.0 mm
Side Brackets (M3 Screws)
Bracket / Screw Count2
Motor Drive System (Type 130)
Activates when Slip Ring is enabled. A Type 130 DC motor with a pinion gear spins a ring gear attached to the bottom cap.
Pinion Pitch ⌀16.0 mm
Motor Body:
27.5 × 20 × 15 mm
Shaft:
⌀2.0 mm × 9.0 mm
2. Specs & Rendering
Assembly Elements
Show Top Cap
Show Bottom Cap
Show Rolled Sheet
Show Side Brackets
Show Motor Holder
Display Settings
Solid Opacity90%
Render Mode
Cylinder Calculations
Wrapping Circumference:
--- mm
Mean Diameter (Dmid):
--- mm
Outer Diameter (Dout):
--- mm
Inner Diameter (Din):
--- mm
Cylinder height:
--- mm
Cap Outer Diameter:
--- mm
* EXPORT BUTTONS ARE COLOR-MATCHED TO THE RENDERED 3D VIEWPORT PARTS.