1. Component Parameters
Central Rod Geometry
Rod Outer Diameter mm
Rod Wall Thickness mm
Guard / Sled Housing
Guard Wall Thickness mm
Guard Length mm
Packaged Electronics (Fixed Size)
• 18650 Battery Holder: 22 × 75 × 24 mm
• LIPO USB-C Charger: 17 × 28 × 4 mm
• ESP32 C3 Supermini: 19 × 23 × 4 mm
• Motor Driver Board: 25 × 22 × 8 mm
• MPU 6500 IMU: 16 × 27 × 4 mm
• Coin Vibration Cells (x2): 11 mm Ø × 3 mm
• Power Switch: 9 × 15 × 20 mm
Transparent Cylinders
Cylinder-LED Radial Gap mm
Cylinder Wall Thickness mm
Max LED Strip Length mm
Max Cylinder Section Length
mm
Connector Ring Profile
Ring Height mm
Ring Center Flange OD mm
Ring End Flange OD mm
Decorative Ridges
Ridge Width mm
Ridge Height (Protrusion) mm
Ridge Ramp (Slope) mm
LED Strip Dimensions (×4)
Strip Width mm
Strip Height (Thickness) mm
Fastener Configuration
M3 Hole Diameter mm
Screw Thread Depth mm
Handle & Pommel
Handle Length mm
Lanyard Hole Diameter mm
2. Draw & Spec Sheet
Assembly Elements
Central Rod
Guard / Housing
Electronics Sled
Transparent Cylinders
Connector Rings
Decorative Ridges
LED Strips
Handle & Pommel
Screw Holes (Amber)
Display Settings
Explode Assembly%
Shell Opacity%
Render
Mode
Calculated Dimensions
Total Length:
533.4 mm
LED Section:
304.8 mm
Handle Length:
--- mm
Guard OD:
--- mm
Cylinder Section:
--- mm
Total Screws:
28× M3